第六次作业（Sixth assignment）.docVIP

第六次作业（Sixth assignment） The sixth computer retrieval operation (the sixth assignment for paper printing) The comprehensive work is divided into two parts: retrieval practice report (must do) and simulation paper (optional). 1. The retrieval report section has the following parts: (1) analysis and research: Background analysis The problem that needs to be solved Retrieval of literature requirements (2) select the retrieval tool (retrieval system); (3) select the retrieval method; (4) to determine the route of retrieval and compile the retrieval type; (5) to find articles and document clues; (6) obtain the original literature. 2. The simulation paper part needs to be written on the basis of comprehensive reading literature. Each student can only choose their own class ordinal number corresponding to the topic, one class is 1-46, the second class is 47-90, the third class is 91-134, the fourth class is 135-178, the class is 179-218, and the six-class is 219-262 Topic of civil engineering paper 1. On the quality control of construction work process 2. Analysis of project cost management and project budget 3. Discussion on construction quality management and control of housing project 4. Current status of engineering in China and its causes and Suggestions 5. Brief discussion on exterior wall insulation system of construction engineering 6. Discuss ways and measures to reduce engineering costs Install engineering organization design 8. Optimization control strategy of concrete construction 9. Reasons for the occurrence of engineering quality and prevention measures A brief discussion on construction techniques of prestressed concrete continuous beam bridge cantilever irrigation 11. Construction application of bridge deck waterproof house 12. Analysis and treatment of main quality problems of bored pile foundation 13. Ways and measures to reduce engineering costs 14. Application research of key chain in Chinas engineering project management 15. Discussion on problems and