甲 醇 洗 操 作 问 答（A. A）.docVIP

甲 醇 洗 操 作 问 答（A. A） A. A 1. What is the melting degree? A: the melting degree is the number of grams of solute dissolved in the solute in 100 grams of solvents at a certain temperature. What are the advantages of the floating valve tower? Answer: air flow from the periphery of the float valve is blown into the liquid layer, the contact time of the air liquid is increased, and the fog foam entrainment decreases, and the plate efficiency is higher The force is large and the operation is elastic, the structure is simpler than the bubble tower, and the pressure drop is lower. 3. What factors affect the absorption operation? Answer: a, airflow speed. B. Spray density. C. Temperature. D. Pressure. E, the purity of absorbent. The role of the bearing lubricant? Answer: a, reduce wear to improve equipment efficiency and life. B. Cooling lubrication area. C. Flush the powder from the lubricating part. D. Vibration damping. E, anti-rust, anti-corrosion and dustproof. 5. Why does the centrifugal pump shut off the outlet valve while driving and cannot be closed for too long? Answer: close the outlet valve, temporarily make the outlet flow is zero, then pump minimum required power, which can limit the motor load at the lowest level, in order to prevent motor burn out due to starting current is too large, when the normal operation of electric motor, should be gradually open the outlet valve, otherwise it will cause the pump shell temperature and damaged parts. What are the characteristics of cold methanol washing? Answer: a, using the low temperature methanol washing shift gas, can remove a variety of impurities in the gas at the same time, such as: CO2, H2S, COS, HCN and possible hydrocarbon in gas, tar, etc., and at the same time removing moisture, dry gas and liquid methanol renewable energy consumption is low, only through the relief flash can absorb most of the gas desorption, when need to complete regeneration, to heat the distillation. B, the low temperature methanol washin