用VB发送组合键代码（Use VB to send the composite key code）.docVIP

用VB发送组合键代码（Use VB to send the composite key code） Use VB to send combination key code 2010-10-25 10:34:25 | classification: program programming | label: | font size In the Small subscription Sends the Ctrl + A key Keybd_event VK_Ctrl, MapVirtualKey (VK_Ctrl, 0), 0, 0 press the Ctrl key PostMessage HWND, WM_KEYDOWN, VK_A, MakeKeyLparam (VK_A, WM_KEYDOWN) press the A key The Sleep 500 delay is 500 milliseconds PostMessage HWND, WM_UP, VK_A, MakeKeyLparam (VK_A, WM_UP) release A key Keybd_event VK_Ctrl, MapVirtualKey (VK_Ctrl, 0), KEYEVENTF_KEYUP, 0 release Ctrl key Send the Alt key + E PostMessage HWND, WM_SYSKEYDOWN, VK_E, press Alt + E, VK_E (scan code 12) for lParam # 29, and 1 indicates that Alt key is pressed WM_SYSKEYDOWN description: The WM_SYSKEYDOWN message is posted to The window with The keyboard focus when The user holds down The ALT key and then presses another key. It also occurs when no window is currently The keyboard focus. In this case, the WM_SYSKEYDOWN message is sent to the active window. the window that receives the message can distinguish between these two contexts by checking the context code in the lKeyData parameter. WM_SYSKEYDOWN WParam nVirtKey = (int); / / the virtual - key code LKeyData = lParam; / / the key data, The Parameters nVirtKey Value of wParam. Specifies the virtual - key code of the key being pressed. lKeyData Value of lParam. Specifies the repeat count, scan code, extended - key flag, context code, the previous key - the state flag, and the transition to the state flag, to in the following table: The Value the Description 0-15 Specifies the repeat count. The value is the number of times the keystroke is repeated as a result of the user holding down the key. 16-23 Specifies the scan code. The value depends on the the original equipment manufacturer (OEM). 24 Specifies been the key is an extended key, as to the right - hand the ALT and CTRL keys that appear on the an enhanced 101 - or 102 - key the rid_devi