负荷计算公式（Load calculation formula）.docVIP

负荷计算公式（Load calculation formula） Calculation formula of air conditioning cooling load Calculation formula for heat transfer of external wall and roof heat transfer Cooling load Q tau (W) is calculated at the calculated time of the formation of external wall or roof heat transfer. Q tau tau = k. f. Δ t - factor (1.1) Type: F - computing area, ㎡; Tao -- computing time, o clock; The time when the temperature wave ACTS on the outer wall or the outside of the roof. Δ t tau - function factor - moment, through the wall or roofing cooling load calculation of the temperature difference, referred to as load temperature difference, ℃. Note: for the outer walls of the delay time is 5 hours, for example, in room 16 points to determine the cooling load of the heat transfer, the computing time to tau = 16, time delay factor = 5, part time for tau  factor = 16-5 = 11. This is because the cooling load on the surface of the 16-hour external wall due to temperature fluctuation is the result of the temperature fluctuation outside the external wall at 5 hours. When the attenuation coefficient of the outer wall or the roof is beta 0.2, the daily average cold load Qpj can be used instead of the cold load Q tau of each calculation moment: Qpj = k. f. Δ TPJ (1.2) Type: Δ TPJ - load average daily temperature difference, ℃. The temperature difference of the outside window is hot and cold The calculation of cold load Q tau is calculated according to the calculation of the calculation of heat transfer in the external window. Q tau tau = a. k. f. Δ t (2.1) Type: Δ t tau - calculating moment under the temperature load, ℃; K - heat transfer coefficient; A - window frame correction factor. External window solar radiation cooling load The calculation of the cooling load Q tau at the time of solar radiation from the outer window shall be calculated according to the following categories according to different conditions: When the outer window has no shading facilities Q Jw tau tau = F, Xg, (3.1) Typ