轻钢厂房要点（Key points of light steel plant）.docVIP

轻钢厂房要点（Key points of light steel plant） The portal steel frame is a typical light steel structure and is the most widely used light steel structure in China. In the design of portal frame light steel structure houses, still there are some conceptual and practical problems need designers attach importance to it, in order to ensure design quality. In this paper the characteristics of the portal frame light steel structure housing, structure calculation and the design and construction measures are discussed some issues need to be aware of. [key words] the main structure of the support structure to the unstability of the web After the web buckling strength Web high thickness than portal rigid frame light house 1.1 basic composition and technical characteristics of portal rigid frame light house can be divided into four most: : the main structure frame, crane beam structure: purlin, wall frame column, wind column, wall beam supporting structure, roof support, and between the column support, tie bar maintenance structure: roof (roof plate, plate, ventilator, etc.), wall (wall, door and window) 1.2 scope of door type rigid frame light house light dead weight, steel, low cost; The seismic performance is good, the anti-seismic design is not considered in the area of earthquake resistance of 7 degrees and the following areas. Can span larger spans; Simple construction, short construction period and no large construction equipment; Form beautiful has contemporary feeling, can satisfy use requirement adequately. Widely used for light roof and light exterior wall; No more than 36 meters, the height of the eaves is no greater than 15 meters. A single-storey house steel structure with no crane or weight no greater than 20 tons of A5 working class crane. 1.3 technical features 1.3.1 allowed just architecture web instability, after using the web buckling strength, according to the theory of effective width and the tension field theory calculation of the bending and shear web high t