麻花钻刃磨（The cutting of the hemp is sharpened）.docVIP

下载本文档

5
0
约2.53万字
约 15页
2017-07-15 发布于河南
举报
版权申诉

麻花钻刃磨（The cutting of the hemp is sharpened）.doc

1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

麻花钻刃磨（The cutting of the hemp is sharpened）

麻花钻刃磨（The cutting of the hemp is sharpened） Hemp drill is a commonly used drilling tool for machining. The structure is simple, but it is not easy to sharpen it. The key is to grasp the method and skill of the sharpening, the method master, the problem will be solved. Here I introduce the hand - cutting technique for the twist drill. Apex Angle of twist drill in general is 118 °, and also can regard it as 120 °. The cutting edge of the drill has several skills: 1. The cutting edge should be smoothed with the grinding wheel surface. Before grinding the drill bit, it is necessary to place the main cutting edge of the drill bit on a horizontal surface with the grinding wheel surface. In other words, the blade should be worn when the blade is exposed to the grinding wheel surface. This is the first step in the relative position of the drill bit and the grinding wheel. 2, bit axis with the grinding wheel surface inclined Angle 60 °. This Angle is the front Angle of the drill, and the Angle is not right, which will directly affect the Angle of the bit and the shape of the main cutting edge and the Angle of the transverse edge. Here refers to the axis of the bit line and the location of the relationship between grinding wheel surface, take 60 ° to be good, this Angle is compared commonly can see it. To note here before the drill sharpening level and the relative Angle position, both to overall consideration, dont ignore the to get the straight edge set the degrees, or to set the Angle and ignoring the straight edge. 3. The edge of the blade will be worn back. After contact with the grinding wheel, the blade should be made from the cutting edge of the main cutting edge, which is to start contact the grinding wheel at the edge of the drill, and then slowly grind down the blade. Bit can contact wheel gently, when cut to a small amount of grinding, uniformity and watch the sparks, adjust size hand pressure, also note that bit of cooling, cannot let the ground fire, cause disco