215年龙奥学校植树节活动方案及总结.doc

2015年龙奥学校二年级三班 植 树 节 活 动 方 案 一、活动目的： 以三月份植树节为契机，开展形式多样的护绿行动和植物种植实践体验活动，做到人人参与，宣传与实际行动相结合，从而令孩子们在活动中体验成功的喜悦，增加对植物生长的了解，增强环保意识，生态意识，以达到为班级、学校、社会增添绿色，净化、美化环境的目的。 二、行动口号：行动起来，争做护绿小使者。三、活动时间： 四、环保护绿活动： 、我和小树留个影：在护绿活动中，学生可以拍一些本班同学养护小树的过程，最后还可以与小树合影。植 树 节 活 动 通过本次活动，增强了我们的环保意识，在植树节的活动中走出了课堂，走进大自然，在自然中学习，了解绿色知识，增加了对植物生长的了解，从而期待以达到为班级、学校、社会增添绿色，净化、美化环境的目的。同时也培养了同学们团结协作、互帮互助、吃苦耐劳的精神。 the same direction of rotation 90 ° or 180 ° for; after each disc rotor when measuring position alignment of the two half coupling constant, should also be in terms of accuracy and consistency. Surface deviation measurement, must in every 180 degrees corresponding to the two radii are equal to each other in order to eliminate errors caused by movement of the rotor. Only a support bearing of the rotor, WA couplings, such as the use of temporary leave the Center, should pay attention to keep the rotor in the measuring process in the center of the bearing oil retaining the nest does not change. Steam oil block, there should be sufficient clearance between the rotor and, in rotors make sure rotor is not on the block or seal oil. At the time of measurement, connections are not allowed between two rotors, each in a free State. Not allowed in case of assembled sleeve, Center work on the toothed coupling. Coupling tool should have adequate stiffness, installation must be secure and reliable. Coupling Center using a dial indicator, the table should be put in prison and avoid touching, to ensure correct measurement. Coupling disc after a week to return to the original position, circumference of dial gauge reading should be able to go back to the original value. When measuring the clearance of end, into the feeler of the gap should not exceed four at a time, when the gap is too large, you can use the gasket with the feeler gauge measurement of gauge blocks or finishing. bearing surface, markup should be in accordance with the mounting support pads, and retest the thickness. Once the lifting cylinder m