应用於音源系统的自动增益控制 The Application of - 先进工程学刊.PDF

先進工程學刊第四卷 第二期 179 Journal of Advanced Engineering Vol. 4, No. 2, pp. 179-186 / April 2009 應用於音源系統的自動增益控制 The Application of Automatic Gain Control to Audio System 1 2 *1 侯俊禮 張俊明 高文章 1 2 *1 Chun-Li Hou , Chun-Ming Chang , Wen-Chang Kao 摘要 本論文中，簡短的介紹了，使用一個 AD633 乘法器和三個 AD844運算放大器， 設計兩個不同類型的自動增益控制 (AGC)電路，可以自動調整增益放大器，獲得一 個穩定的數值。當輸入的信號變強，在 AGC電路將減少增益放大器。反之，當為輸 入信號削弱，AGC的電路會增加增益放大器。由 AGC電路實驗結果得知這項研究結 果也將得到更好的回饋的反應時間及防止增益放大器因分子為零而造成放大無限大的, 對策。 關鍵詞 ：運算放大器，自動增益控制，反向回饋 Abstract The objective of this brief presents the implementation, using an AD633 multiplier and three AD844 operational amplifiers, of two different kinds of Automatic Gain Control (AGC) circuits which can adjust the gain of an amplifier to a stable value. As the input signal strengthens, the AGC circuits will decrease the gain of the amplifier. On the contrary, as the input signal weakens, the AGC circuits will increase the gain of the amplifier. Experimental results form two different kinds of AGC circuits, we can know this research will also im- prove feedback response time and prevent Af from approaching infinity as the denominator of Af tends to zero. (Af is the gain of the feedback amplifier.).