材料加工过程传输理论传热.ppt

铸件充型过程仿真结果 压力铸造过程的数值仿真 合作单位：江南压铸总厂 铸件名称：油盘 压力铸造过程的数值仿真 压力铸造过程的数值仿真 合作单位：红林机械厂 铸件名称：摩托车发动机汽缸头） 铸件及浇注系统的实体模型 铸件及模具的实体模型 低压铸造过程的数值仿真 铸件充型及凝固过程仿真结果 低压铸造过程的数值仿真 合作单位：哈尔滨大电机研究所 铸件名称：水轮机导叶 点击动画 砂型铸造过程的数值仿真 合作单位：沈阳飞机工业公司 铸件名称：镁合金油箱 砂型铸造过程的数值仿真 合作单位：沈阳飞机工业公司 铸件名称：11号机管接头 砂型铸造过程的数值仿真 误差函数 在数学中，误差函数（也称之为高斯误差函数）是一个非基本函数（即不是初等函数），其在概率论、统计学以及偏微分方程中都有广泛的应用。 自变量为x的误差函数定义为： 　且有erf(∞)=1和erf(-x)=-erf(x) 误差函数的级数展开式为： * The fifth case I would like to show is developing this turbine housing. * We started this project with building the part solid modeling. Here are the key procedures for building it. Based on the design document, specifications and drafting from design team, individual parts were built. * And then put them together. Meanwhile, we checked all the sizes and shapes in detail, revised more than 100 mistakes, and fixed many dilemma problems. * Next, built the solid modeling for casting, by adding machining allowance and drafting, and suppressing detailed features. * Here are the casting solid modeling and its rapid prototype * We built casting process modeling by adding runner, chill and mould as here show. * We then conducted process simulation, In this stage, AFSolidification system and ProCAST are used to do it. First, executing a variety of solidification simulation by using AFSolidification System, here are some results. * choose the best one to carry out a flow-thermal coupled simulation by ProCAST, Here are the simulation results for mold filling process. * Here are the results for solidification process * here are some cores and their assembly. * this is the runner modeling and its mould assembly. * Here is the assembly explosive process for this turbine housing. Finally, transfer all information to tooling maker and conduct CNC and general machining. The pouring experiment was finished last year. * Here is a turbine adjusting slice with 1.5 mm wall, 650 mm length, 120 mm width, which produced by investment casting. Its rejection with crack and p