俞雷-涡轮增压器组件的装配与检测系统设计-终稿.docVIP

本科毕业设计（论文） 题目 涡轮增压器组件的装配与检测系统设计 学 院 电气与自动化工程学院 年 级 2011级 专 业 自动化 班 级 自动化113 学 号 160111126 学生姓名 俞雷 校内导师 毛丽民 职 称 实验师 校外导师 朱广海 职 称 工程师 论文提交日期 2015-05-12  常熟理工学院本科毕业设计(论文论文PROFIBUS-DP、Ethernet、LabVIEW、工业控制机以及图像处理等相关技术。设计出对涡轮增压器组件的装配与检测系统，以高效地实现装配任务。本课题将主要研究如何有效地装配涡轮增压器的以下组件：Bearing、Shroud、Pin、SWA（Shaft Wheel Assembly)、TSA（Shaft Wheel Assembly）等。 经实践证明，本文设计的涡轮增压器组件的装配与检测系统提高了装配效率以及质量，有效地降低了生产的成本，间接地提高了产业效益。该设计也在实际应用过程中满足了现实需求。 关键词：涡轮增压器 S7-300PLC LabVIEW OPC PROFIBUS-DP 图像处理 Design of an Assembly and Testing System of Turbocharger Components Abstract Turbocharger as a device to improve the power, energy saving and emission reduction, is being applied more and more to a variety of modern car. Because of this, the demand for the turbocharger is also growing. In view of the current situation, to improve efficiency and quality of turbocharger assembly will become an important research direction of turbocharger assembly. In order to improve the system to adapt to changes in the assembly process capability and strengthen the reliability of assembly systems, this design will combine the characteristics of the turbocharger assembly, integrated and applied S7-300PLC, OPC, PROFIBUS-DP, Ethernet, LabVIEW, industrial control machine and image processing and other related technologies. Design assembly and testing system of turbocharger components to efficiently achieve assembly task. This paper will mainly study how to effectively assembly turbocharger with the following components: Bearing, shroud, Pin, SWA (Shaft Wheel Assembly), TSA (Shaft Wheel Assembly), and so on. The practice proved that the assembly and testing system of turbocharger components designed in this paper improves the assembly efficiency and quality, effectively reduce the cost of production, and indirectly improve the industrial efficiency. In the actual application process, t