基于MBD三维模型的工艺制造试验.pdfVIP

，!'a 叶雄 2013 年第 26 卷第4 期 E窒E罩tJiiII~!:j~14 Electronic Sci. &Tech. / Apr. 15. 2013 基于 MBD 三维模型的工艺制造试验 焦晓艳l ，罗 锡2 ，姜红明3 (1.中国航空工业计算技术研究所总师办，陕西西安 710119; 2. 中国航空工业计算技术研究所 1 车间， 陕西西安 710119; 3. 中国航空工业计算技术研究所4 室，陕西西安 710119) 摘 要按照MBD 信息化建设规划，在结构设计能够实现 MBD 三维模型设计的基础上，开展了基于 MBD 三维 模型的工艺制造方法试验。以 MBD 三维数模设计为输入基础，结合生产制造软硬件环境现状，对三维模型的工艺制 造各流程步骤进行了分析，包括三维模型的读入、工艺性分析、零件的数控编程以及三维模型零件数控加工等。初步 形成了三维设计与工艺制造流程。 关键词 MBD; 三维模型;工艺制造 中图分类号 TP39 1. 73 文献标识码 A 文章编号 l ∞7 -7820(2013)04 -037-04 Manufac阳ring Process Test ßased on Three-dimensional Model of Model ßased Definition 2 3 JIAO Xiaoyan 1. LUO Xi , JIANG Hongming ( 1. Office of Chief Engineers , Institute of Computing Technology of Chinese Aviation Industry. Xi'an 710119 , China; 2. First Workshop , Institute of Computing Technology of Chinese Aviation Industry , Xi'an 710119 , China; 3. Unit 4 , Institute of Computing Technology of Chinese Aviation Industry , Xi'an 710119 , China) Abstract According to the MBD' information construction planning , manufacturing process test based on the MBD three-dimensional model is carried out on the basis that structural design can be achieved based on MBD 3 D model design. Each step of the manufacturing processes of the three-dimensional model is analyzed based on the three-dimensional model , including the input of three-dimensional model , process analysis , NC programming of parts , and CNC machining of three-dimensional mode l. The initial design of three-dimensional and manufacturing process is realized. Keywords mo