对电控带式铣床运用液压自动精度控制和宽度控制-外文翻译.docxVIP

PAGE  PAGE 15 Appication of hydraulic AGC and width control to a hot strip mill D.Alan Davies,Project Sale Manager,Engineering and Construction Div. Davy Mckee (Sheffie id)Lid, Sheffieid, U. K. THE Pohang Iron Steel Co.(POSCO) No.2 hot strip mill at Pohang, South Korea,is a modern, three-quarter continuous mill built by Mitsubishi in 1980.The mill is 2050mm wide,has four roughing stands and seven finishing srands.The seven finishing srands have a combined power of 56,000kw with a maximum strip speed of 21 metres/s.Coil weight is up to 35.3 tonnes. Annual mil capacity is 3.5