17-核安全与保障（17 - nuclear safety and security）.doc

17-核安全与保障（17 - nuclear safety and security） Nuclear security and security China tests the non-destructive measurement of new fuel components in the new fuel assembly Meng yantai, wang loyalists, he lixia, bai lei, shao jiwen, zhu liqun The non-destructive analysis and measurement of the new fuel components of the fast reactor in China were measured using active neutron coincidence method and gamma ray measurement. The active neutron coincidence ring (UNCC) was used to measure the distribution of 235U in the two fuel assemblies. The distribution trend of the measured curve is consistent with the actual abundance distribution. The component neutron corresponds to the counting rate and the position corresponding schematic diagram shown in figure 1. Using the HPGe detector, the data acquisition software and special analysis software are obtained by using the data acquisition software and special analysis software. The deviation between the measurement value of 235U and the nominal value is about plus or minus 3%. The measured value of 235U and its relative deviation with nominal value are listed in table 1. This experiment is the first application of non-destructive methods to measure the properties of new fuel components, which lays a foundation for similar work in the future. FIG. 1 the component neutron conforms to the counting rate schematic diagram Table 1 single rod abundance measurement and relative deviation Single rod, 235 u abundance / % Relative deviation / % Single rod, 235 u abundance / % Relative deviation / % Measured value The real value Measured value The real value 069028 62.32% 64.4% 3.2 069084 62.38% 64.4% 3.1 069070 63.21% 64.4% 1.8 069071 62.12% 64.4% 3.5 069072 66.12% 64.4% 2.7 069075 63.81% 64.4% 0.9 069076 62.68% 64.4% 2.7 069080 61.57% 64.4% 4.4 Research on neutron multiplicity measurement of plutonium material Xu xiaoming, jia xiangjun, zhu liqun, wang loyalists As a new method of NDA analysis, the neutron multiplicity measurement technology i