几种PWM控制方法（Several PWM control methods）.doc

几种PWM控制方法（Several PWM control methods） Several PWM control methods. TXT Several PWM control methods The introduction In the theory of sampling control, there is an important conclusion: the effect of the narrow pulse, which is equal and different in shape, is basically the same when it comes to inertia. PWM control technology is based on the theory of the conclusion, the conduction of semiconductor on off the device on and off, make the output end of a series of equal amplitude and pulse width are not equal, using these instead of a sine wave pulse waveform or other need. According to certain rules, the width of each pulse is modulated, which can change the output voltage of the inverter circuit and change the output frequency. The basic principles of PWM control have been proposed for a long time, but the development level of power electronics has not been realized until the 1980s. Until the 1980s, with the emergence and rapid development of all-control power generation devices, PWM control technology was really applied. With the power electronic technology, microelectronics technology and the development of the automatic control technology and new theory methods, such as modern control theory, the application of linear system control thought, PWM control technology obtained the unprecedented development. So far, there have been many kinds of PWM control technologies, according to the characteristics of PWM control technology, so far, there are mainly 8 methods. 1 phase voltage control PWM Width PWM method [1] VVVF (Variable Voltage Variable Frequency) device in the early days is to use PAM (Pulse Amplitude Modulation) control technology, the inverter part can only output adjustable Frequency square wave Voltage not surge. The PWM method is one of the simplest PWM methods to overcome this shortcoming of PAM method. It is the width of each pulse were listed as equal pulse PWM wave, the cycle can be listed by changing the pulse frequency modulation, pulse width or du