化工总控工(中级)理论知识试卷(F)（Chemical master control (intermediate) theoretical knowledge test paper (F)）.docVIP

化工总控工(中级)理论知识试卷(F)（Chemical master control (intermediate) theoretical knowledge test paper (F)） 1. Judge: (please fill in the brackets before you fill in the judgment, and fill in the correct square root with the wrong X, with a total of 45 points.) When the chemical burns, remove the clothes quickly, remove the chemicals from the skin and rinse them with a lot of clean water. (square root) 2. After the catalyst has been poisoned, the active recovery of the catalyst can be properly treated, which is called temporary poisoning. (*) 3. When the eye is suffering from acid burns, the best method is to rinse immediately with water from the bottle and then be washed with 200g/L of boric acid. (square root) 4. The higher the conversion rate of the main reaction, the better the activity of the catalyst, the higher the conversion rate of the main reaction will be in certain contact time. (x) 5. Tubular reactors can also be operated intermittently or continuously. The production cycle of the batch reactor shall include: reaction time, feeding time, material time, heating (or cooling) time, cleaning time, etc. The advantage of a tubular reactor is to reduce the time of remix and control reaction. To improve the production strength of the equipment, more products can be produced in the same equipment, thus improving the production capacity of the equipment. The purpose of chemical production is to get the finished product. (x) 10. The reactor is a gas-liquid reaction. Any chemical production process consists of a series of chemical reactions and a series of physical operations. (x) 12. The higher the consumption quota, the higher the economic benefit of the production process. Ethylene and propylene are the basic chemical raw materials of organic chemicals. (x) 14. The chemical process is characterized by the synthesis of the production process, the scale of the device and the refinement of the products. (square root) 15. When the centrifugal pump stops, close the outlet valve