SMT（SMT）.docVIP

SMT（SMT） SMT is the surface mount technology (surface mount technology) (Surface Mounted Technology abbreviation), which is the most popular technology and process in the electronic assembly industry What are the characteristics of SMT? The assembly of electronic products of high density, small size and light weight, volume and weight of SMD components only traditional cartridge elements around 1/10, common SMT, electronic products size 40%~60%, weight 60%~80%. SMT High reliability and strong vibration resistance. Solder joint defect rate is low. High frequency characteristic. Electromagnetic and radio interference reduction. It is easy to realize automation and improve production efficiency. Cost down to 30%~50%. Save material, energy, equipment, manpower, time, etc.. SMT basic process elements (printing or dispensing) -- mount -- (curing) / reflow soldering / cleaning / repair / detection printing Its role is to pad solder paste or glue stencil to patch PCB, preparing for welding components. The equipment used is the printing press SMT processing workshop (solder paste printing machine) located at the front end of SMT production line. SMT common knowledge introduction 1. generally speaking, the temperature specified in the SMT workshop is 25 + 3 degrees centigrade. 2. when solder paste is printed, the materials and tools to be prepared are solder paste, steel plate, scraper, wiping paper, dust-free paper, cleaning agent and mixing knife. 3. commonly used solder paste alloy component is Sn/Pb alloy, and alloy ratio is 63/37. The main component of the 4. solder paste is divided into two parts tin and flux. 5. the main function of flux in welding is to remove oxide, destroy the surface tension of molten tin and prevent re oxidation. Tin particles and Flux 6. solder paste in (flux) volume ratio is 1:1, the weight ratio of about 9:1. 7. solder paste access principle is first in first out. 8. solder paste used in Kaifeng, must go through two important processes, tempe