煤矿用气体测定器（Coal mine gas meter）.docVIP

煤矿用气体测定器（Coal mine gas meter） A coal mine gas meter An overview, Product characteristics The CYH25 coal mine USES an oxygen detector (the instrument), which USES electrochemical oxygen sensors, embedded microcontroller intelligence controls, and four leds display a dual-purpose machine. Small size, light weight, simple operation and convenient maintenance, the instrument is easy to contact with thin film, it can be used to make up to zero nine and eight nine and nine, the sealing performance is good, accurate and reliable. 2. Main purpose and scope of use This instrument is widely applicable to the continuous monitoring of oxygen concentration in the working environment of flammable and combustible gas mixture in underground coal mines. 3. Explosion-proof type Explosion-proof form: essential safety of mine; Explosion-proof mark: ExibI Mb 4. Environmental conditions A) working temperature: 0 ℃ to 40 ℃; B) relative humidity: no more than 98%; C) atmospheric pressure: 86kPa ~ 116kPa; D) the storage temperature: - 40 ℃ ~ 60 ℃; E) underground coal mine with methane or coal dust explosion hazards. Ii. Structure characteristics and working principle 1, structure, 1. 2 digital tube 3 mask 4 operation key 5 alarm diode 6 alarm buzzer 7 circuit board 8 battery pack 9 battery pack 10 rechargeable screw 11 electrochemical oxygen sensor 12 rear casing 14 nameplate 15 rings FIG. 1 structure diagram of oxygen determination apparatus for CYH25 coal mine 2. Working principle When the instrument is used to measure the oxygen in the air, the electrochemical sensor reacts directly with the gas in the environment to produce a voltage signal of linear change. After linear amplifier amplified signal input microcontroller in the A/D converter into digital signal, through the microprocessor data processing, show oxygen concentration by the digital tube, after the oxygen concentration is lower than the set emergency alarm, send out sound and light alarm signal. The instrument has the functio