磁环的工作原理及应用（Working principle and application of magnetic ring）.docVIP

磁环的工作原理及应用（Working principle and application of magnetic ring） Working principle and application of magnetic ring Ferrite anti-interference core characteristics Ferrite anti-jamming core is developed in recent years, the cheap and fine interference suppression devices, its effect is equivalent to a low-pass filter, better solve the power cord, the high frequency interference suppression and connector line problem, and is simple to use, convenient, effective, take up the space is not large, and a series of advantages, with ferrite anti-jamming core to suppress electromagnetic interference (EMI) is simple and effective method in the economy, has been widely used in a variety of military or civilian, such as computers, electronic devices. Ferrite is a kind of using high magnetic conductivity material permeability close one or more other magnesium, zinc, nickel and other metal burn together in 2000 ℃, At low frequencies, the ferrite anti-interference core presents very low perceptual impedance values, which do not affect the transmission of useful signals on the data line or signal line. At high frequencies, and starting from about 10 MHZ, impedance increases, the inductance component remains very small, the resistive component increases quickly, when there is high frequency energy through the magnetic materials, resistive component would have to convert that energy into heat energy dissipation. In this way, a low pass filter can make the high frequency noise signal have a large attenuation, and the impedance of the low-frequency useful signal can be ignored, which does not affect the normal operation of the circuit. EMI absorption ring/bead is a component made of ferrite, which is a kind of absorbing and dissipating element. Its features are: absorption of high frequency signal and the absorption of energy is converted into heat dissipation, thus suppressing high frequency interference signals along a wire transfer, the purpose of the equivalent impedance of the resist