铝材知识（Aluminum knowledge）.docVIP

铝材知识（Aluminum knowledge） First look the material of aluminium alloy door window The aluminium profile, thickness, strength and oxide film of the high quality aluminum alloy doors and Windows are in line with the relevant standards of the country. The thickness of the wall should be above 1.2mm and the oxide film thickness should reach 10 microns. If you exceed the national standard, even the products that meet European standards are of course the best choice. Second, the processing of aluminum alloy doors and Windows High quality aluminum alloy doors and Windows, processing fine, installation is exquisite, the sealing performance is good, the switch is comfortable. Inferior aluminium alloy door, material and specification can not meet the standard, and processing is uneven, sealed performance is poor, not only rain of air leak leakage, and in the case of strong winds and external force is too large prone to cracking phenomenon such as glass, glass blowing fall or touch fall. Third look the appearance of aluminium alloy door and window Appearance is also a critical link in aluminum alloy doors and Windows, aluminum alloy doors and Windows have artificial oxide film and coloring formation on the surface of composite membrane layer, this kind of composite membrane not only corrosion resistance, wear resistance, and have certain fire prevention function, high gloss, when the choice to the comparison of as much as possible, try to choose normal aluminium alloy the product of manufacturer of door window, select the processing precision, accurate, flexible, convenient opening and closing without noise, and adornment effect elegant products. Fourth look price of aluminium alloy door window In general, high quality aluminum alloy doors and Windows are high in production cost, about 30% higher than inferior aluminum alloy doors and Windows. Some of wall thickness of aluminium alloy door that 0.6 0.8 millimeter aluminous profile makes, tensile strength and yield strength under