Airbag（安全气囊）.docVIP

Airbag（安全气囊） The composition of the airbag system Airbag system mainly include collision sensor, the airbag computer, system indicator lights, airbag components and connection lines, airbag components including air bags, gas generator and igniter, etc. (1) collision sensors for each car factory production of vehicles, the installation location of collision sensors is not the same, and the name of the collision sensors are not unified, for example, some collision sensors according to the working principle is also known as acceleration sensor. The collision sensor is divided into collision sensor and collision sensor. The trigger collision sensor is also called the impact strength sensor, which is used to detect the deceleration or inertia of the collision, and sends the collision signal to the airbag computer as the trigger signal of the airbag computer. The collision sensor, also known as the security impact sensor, is in series with the trigger collision sensor to prevent airbags from accidentally exploding. According to the structure, the collision sensor is divided into electromechanical collision sensor, electronic collision sensor and mechanical collision sensor. The collision sensor generally adopts electronic structure, and the mechanical and mechanical structure can be used to trigger the collision sensor. Electromechanical combination collision sensors is the use of mechanical motion (rolling or rotation) to control the electrical contact action, again by off contact and connect and closed to control the air circuit is cut off, common ball type and eccentric hammer impact sensors. The electronic collision sensor has no electric contact, and there are two types of resistance strain and piezoelectric effect. The mechanical type collision sensor is commonly used in mercury switching, which is used to control the connection and cutting of the air bag circuit. (3) for early cars, general equipped with multiple trigger collision sensors, installed in the front of