auotoCAD另一版本的教案（Another version of auotoCAD）.docVIP

auotoCAD另一版本的教案（Another version of auotoCAD） Special application of this method: draw the keyway!! (3) rectangle with cut angle: RECTANGLE--C-- first input value input value to second -- chamfer -- painted rectangle. (4) rectangular with line width; RECTANGLE--W-- input width value to draw rectangle -- ! Three. Basic editor 1. delete ERASE-- choose to delete the object -- button. Related: how do you choose Edit objects? * * (1) direct radio: move the mouse to any position on the object, and then click left to indicate the object selected!! * * * (2) window selection: From left to right, select two points to make a rectangle (solid line box). The objects in the box are selected!! * * * selects two points from right to left to form a rectangular box (Xu Xiankuang), and objects in the box and inside the bounds of the box are all in (3) ALL, which means all selected 2. parallel replication (offset) A special copy (COPY) OFFSET-- input distance -- select objects (radio one) -- points (select a point to determine the range of repeat button.) -- -- 3. trim: TRIM-- choose the cutting edge (cutting edge) (single and multiple) - right selection -- clipping (single) - select clipping object -- right..--... Note: in the choice of cutting edge (cutting edge), the easiest way is to select a small range of object!! Supplement: Quickly extend horizontal or vertical lines: select the straight line, select an endpoint and move to the appropriate position. Then hit ESC two times. Return to normal 4. interrupts: Generally used for imprecise disconnection of objects The first second places -- position BREAK-- choose to break. For the closed contour, pick counterclockwise interrupt!! When drawing the three view, the baseline of the three views is usually generated with the BREAK auxiliary command 5. circle copy (rotate copy) ARRAY (array) - Open dialog box click -- select object -- select object -- right click -- select input copy number of -- ring array (including --OK