cad快捷键说明（Cad shortcuts）.docVIP

cad快捷键说明（Cad shortcuts） Address: No. 199 East Gate Road, Yongan, Fujian, China, Department of electrical engineering, Fujian water conservancy and electric power Career Technical College. Recipient: Lin Jie, zip code: 366000 Two, the naming rules of quick commands 1 、 the shortcut command is usually the first or the first two letters of the command, and some of the first three letters. For example, the shortcut to the straight line (Line) is L; the quick command of COpy is CO; the linear ratio (LTScale) shortcut is LTS. In the process of using, try to use the first letter of the command, not to use the first two letters, up to the first three letters, that is to say, the AutoCAD shortcut is generally not more than three letters, if a command with the first three letters are not, can only enter the complete order. 2, another type of shortcut command is usually composed of Ctrl key + one letter, or defined with the function key F1~F8. For example, Ctrl key + N, Ctrl + O, Ctrl + S, Ctrl + P, respectively, new, open, save, and print the file; F3 means object capture. 3, if some commands have the same first letter, then the common command takes the first letter, and the other command can be expressed in the first two or three letters. For example, R means Redraw, RA means Redrawall; for example, L means Line, LT stands for LineType, LTS stands for LTScale. 4, some exceptions need us to remember, such as modify the text (DDEDIT) is not DD, but ED; and AA means Area, T means Mtext, X means Explode. Three, the definition of quick command It has been mentioned that all the shortcut commands defined by AutoCAD are saved in the ACAD.PGP file. ACAD.PGP is a plain text file that users can edit using the ASC II text editor (such as DOS under EDIT) or directly using notepad in the WINDOWS attachment. Users can add some shortcuts to the Auto CAD command themselves to the file. Typically, a shortcut command uses one or two easily remembered letters and replaces it with the commands