ABS塑料特性（ABS plastic characteristic）.docVIP

ABS塑料特性（ABS plastic characteristic） ABS plastic Chemical name: acrylonitrile butadiene styrene copolymer English Name: Acrylonitrile Butadiene Styrene ABS is a copolymer of three monomers, acrylonitrile, A, butadiene, B and styrene, S, referred to as ABS. Each monomer has different properties, and ABS is a noncrystalline material in morphology. This determines the ABS materials low temperature resistance, impact resistance, appearance characteristics, low creep, excellent dimensional stability and easy processability and many other characteristics. And the surface hardness is high, the chemical resistance is good, at the same time, by changing the proportion of the three components, ABS can change the various properties, so ABS engineering plastics have a wide range of uses. The synthetic ABS has four kinds of medium impact type, high impact type, super high impact type and heat resistant type. Because of its advantages of toughness, rigidity and rigidity, the range of application has been far more than PS, and has become an independent plastic variety. ABS can be used for both ordinary plastics and engineering plastics. ABS general parameters Specific gravity: 1.05 g / cubic centimeter Molding shrinkage: 0.4-0.7% Water absorption rate: 0.2%~0.45% Molding temperature: 200-240 DEG C Drying conditions: 2 hours and 80-90 hours The thermal deformation temperature is 70 - 107 Use temperature range: -40 DEG C, ~80 DEG C Hardness: R65~115 First, the performance of ABS 1 general performance The appearance of ABS is opaque in Ivory aggregate, non-toxic, tasteless, low water absorption rate of the products can be a variety of colors, high gloss and has 90%. ABS has a relative density of 1.05, and ABS has good compatibility with other materials. It is easy to be printed, coated and plated. ABS oxygen index is 18.2, is a flammable polymer, flame yellow, black smoke, burning but not dripping, and a special cinnamon. ABS is the resin of a comprehensive performance is very good, w