catia小技巧（Catia tips）.docVIP

catia小技巧（Catia tips） On the road, the novice recently learned how to use CATIA skills, and share with novices. Expect extra points! 1. F3 hide directory tree; 2., the left mouse button (or right) + mouse middle key view rotation; mouse key view translation; mouse key view zoom in and out; 3. Alt + Enter = properties; 4., shift and middle key appear red box after dragging, quickly enlarge the designated part, specify the observation direction; 5. press CTRL first, and then the middle key is zoom in. First press the middle key, and then the CTRL is the object rotation; 6. when the object is rotated, a red circular region appears outside, in the circle region, the arbitrary rotation of the XYZ axis, and a specific rotation of the Z axis outside the circular region; 7., Press, any, keyboard, arrow, the, preselection, navigator, appears., ctrl+F11, object selectors appear. 8. Ctrl + Page Upzoom in Ctrl + Page out Downzoom Shift + down arrow Rotate Ctrl up and down arrow Pan Ctrlshift + arrow Rotate ShiftF3work on specification tree ShiftF2specification tree overview MB3+Customize can be customized Alt+mb2 recurrentselection Ctrl+u regeneration (for the assembly of a) CTRL + mouse wheel zoom feature tree Named 9. 3D parts when modeling with the same name: because the parts parts cannot be invoked in the assembly environment, so before you can advance 3D modeling, model tree default system parts name to parts of the file name will be used. This will not only avoid duplication of parts name, but also facilitate the preservation of parts; 10. tolerance: in parts of the engineering drawings are often eg.tolerance Phi 39 + 0.05 mark, CATIA default font SICH cannot be marked according to the requirements of the mark is in the form of phi 390.05. At this point, you can set the tolerance type to TOL-1.0 and mark with the alpha CATIA Symbol font. 11. the right mouse button in the project icon note in the application: (1) in the half cutaway view, the dimension line is often half,