cnc加工中心中几组常用指令的区别及编程技巧（The difference and programming skills of several commonly used instructions in a CNC machining center）.docVIP

下载本文档

1
0
约8.86千字
约 9页
2017-07-21 发布于河南
举报
版权申诉

cnc加工中心中几组常用指令的区别及编程技巧（The difference and programming skills of several commonly used instructions in a CNC machining center）.doc

1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

cnc加工中心中几组常用指令的区别及编程技巧（The difference and programming skills of several commonly used instructions in a CNC machining center）

cnc加工中心中几组常用指令的区别及编程技巧（The difference and programming skills of several commonly used instructions in a CNC machining center） The differences and programming techniques of several common instructions in CNC machining center -------------------------------------------------------------------------------- With the development of science and technology and the progress of society, the quality and quality of products are getting higher and higher, so that the application of CNC machines has been popularized to a certain extent, while the high performance and high efficiency have been achieved Processing centers are becoming a social necessity. Through several years of practical application and teaching practice and exploration of the processing center, I will sum up my experience and experience, and I hope it will be of great help to the readers Di. 1. pause instruction G04X (U) _/P_ refers to the tool pause time (feed stopped, spindle does not stop), the address P or X is the value of the pause time. The value behind X should be decimal, otherwise this value will be used In 1/1000 calculations, in seconds (s), the values in P cannot be followed by decimal points (i.e., integer representations), in milliseconds (MS). For example, G04 X2.0; or G04 X2000; pause for 2 seconds G04 P2000; But in some hole processing instructions (such as G82, G88 and G89), in order to ensure the hole bottom roughness, when the tool is processed to the bottom of the hole, there must be a pause time, at this time can only be expressed by address P, if In address X, the control system considers X to be the X axis value for execution. For example, G82X100.0Y100.0Z-20.0R5.0F200P2000; drilling (100.0100.0) to the bottom of the hole for 2 seconds G82X100.0Y100.0Z-20.0R5.0F200X2.0; drilling (2.0100.0) to the bottom of the hole will not be suspended. The differences and connections between 2.M00, M01, M02 and M30 M00 is a program with unconditional pause instruction. The program executes to this end