Console端口（The Console port）.docVIP

Console端口（The Console port） The technology network must have a comprehensive understanding of the network device interface creation time: June 22, 2007 (Friday) at 08:40 | classification: Network Administrator Network device interface type (1) Introduction: with the continuous development of the Internet bar industry, the network management has changed from waiter to computer problem expert. Undeniable Yes, now the network management friend technology is much better than before, but if you want to make yourself a truly technical network management, we have to do it again Add oil. For example, the understanding of the switch can not always stay in the Lan object this level, right? The types of data interfaces of various switches are constantly changing, and the functions of the switches are also increasing The connection ports of various special equipment are added continuously (to the switch), which makes the interface type of switches become very rich. In order to get it all round To understand these interfaces and to improve ourselves, it is necessary to recognize them one by one. 1.RJ-45 interface This interface is now our most common network device interface, commonly known as crystal head, professional term for RJ-45 connector, belongs to double Twisted Ethernet interface type. The RJ-45 plug can only be inserted in a fixed direction and is provided with a plastic spring piece that is stuck with the RJ-45 slot to prevent falling off. This interface can be used in 10Base-T Ethernet, 100Base-TX Ethernet and 1000Base-TX Ethernet, and the transmission medium is all Twisted pair, but depending on the bandwidth, there are different requirements for the medium, especially the 1000Base-TX Gigabit Ethernet connection, at least With ultra five lines, to ensure stable high speed, you also need to use 6 lines. 2.SC fiber optic interface SC fiber interface has been applied in the 100Base-TX Ethernet era, so it was called 100Base-FX (F is optical fiber word at that time Fibe