联合收割机轴流脱粒过程的动力学仿真张认成.pdfVIP

2 0 0 1 5 32 3 张认成　　桑正中 　　【】　 ,。 ,。, ,, ,。。 : 　　　 : S225 : A Dynamic Simulation of the Axial Threshing Process of Combine Harvesters Zhang Rencheng (University of Science and Technology of China) Sang Zhengzhong (J iangsu University of Science and Technology ) Abstract Based on the principle of a varied ass syste , the non-linear athe atical odel of the crop echanics for an axial threshing process was set up The results of si ulation research and. theoretical analysis on the odel show that both the counteracting force of the threshing device and striking force of the threshing tooth are co plicated periodic functions of the angle displace ent. Every cycle of these functions can be divided into two parts, viz. striking process and loosening process The threshing is carried out ainly in the first half cycle where the. , centrifugal force changes fro ini u to axi u and the striking force fro axi u to ini u . In the second half cycle ste is loosened co pletely so that the seed can be separated easily. At the sa e ti e, the anglevelocity of the crop is decreased to ini u , which akes it possible for the crop to gain great striking force in the next cycle The two processes carried. through one after the other ake threshing and separating co pleted successfully. Key words　Co bine harvesters, Threshing process, Dyna ics, Si ulation 。 　　 1　 , , [1] ,, , [ 1] ,