复杂曲面零件的反求工程和快速原型制造技术 - CORE.PDF

·设计与研究· 组合机床与自动化加工技术 ( ) 文章编号 :1001 - 2265 2005 06 - 0040 - 03 复杂曲面零件的反求工程和快速原型制造技术 1 ,2 1 2 2 1 2 付泽民 , 姚斌 , 王大镇 , 李延平 , 胡国清 , 常勇 ( 1 厦门大学 机电工程学院 , 福建 厦门 　361005 ; 2 集美大学 机械工程学院 , 福建 厦门 　361021) 摘要 :根据零件曲面复杂设计及概念设计中不可缺少的反求技术与快速成型技术的结合应用 ,介绍了 ATOS 测量系统的反 求数据采集方法及三角域 Bezier 曲面拟合技术,分析了在快速成型技术中反求数据的优化处理方式 ,进行了快速成型机的 ( ) 接口文件生成和实体成型加工 FDM 试验。 关键词 :反求工程 ; 快速原型 ; ATOS; 测量 ; 三角 Bezier 曲面 中图分类号:TH166 :TP274 　　　文献标识码 :A Reverse Engineering and Rapid Prototyping Manufacturing Technology of the Complicated Surface Parts 1 ,2 1 2 2 1 2 FU Zhemin , YAO Bin , WANG Dazhen , LI Yanping , HU Guoqing , CHANG Yong ( 1. School of Mechanical Electrical Engineering , Xiamen University , Fujian Xiamen 361005 , China ; 2. College of Mechanical Engineering , Jimei University , Fujian Xiamen 361021 , China) Abstract : According to the combined application of the reverse technology and the rapid prototyping , which is necessary for the complex design and the concept design of part surface , the text firstly introduce the method of gathering reverse data by ATOS measuring system and the technology of blending triangular Bezier surface . Second , it analyses the optimized disposition of method of reverse data which is relat ed to the technology of rapid prototyping . Third , the trial has been done about the interface files generated and linked the device of rapid prototyping and model processing trial. Key words : reverse engineering ; rapid prototyping ; ATOS measure ; triangular Bezier surface