扇型圆管钢屋盖桁架节点性能研究-昆明理工大学学报.PDF

32 5 ( ) o.l 32 No5 2007 10 Journal ofKunm ingUniversity of Science andTechnology ( Science andTechnology) Oct. 2007 * 庄学真, 金建敏, 黄襄云 ( , 510405) : 对东莞塘厦体育馆工程钢屋盖桁架扇型节点的焊接技术采取超现行行业规 标准, 进行 了 3 个足尺扇型节点的静力性能试验和有限元分析.讨论了试验的加载装置实测结果和有限元 计算结果, 给出节点应力分布及钢屋盖桁架节点极限破坏荷载. 研究表明, 该钢屋盖桁架节点在 设计荷载2倍设计荷载作用下, 具有足够的强度和刚度;有限元计算分析与试验实测结果具有 相似性,说明有限计算能够较准确地了解钢节点受力状况. 最后对提高该钢屋盖桁架扇型节点的 焊接质量提出建议. : 圆钢管; 焊接工艺;静力性能;足尺试验; 有限元计算; 相贯节点 : TU312 : A : 1007- 855X(2007) 05- 0061- 07 Behavior of Steel Joints in Roof Construction for FanRound Steel Tube ZHUA NG X uez hen, J IN J ai nm in, HUA NG X ai ngyun (Earthquake Engineering Research TestCenter, GuangzhouUniversity, Guangzhou 510405, China ) Abstract: Construction and design of a fan round steel tubew ith welding joints arebased on the mi plementation of the standard used in Exhibitions and SportsCenter ofTangXiaTown in Dong Guan City. A fullscale test of the 3 joints and finite element analysis are carried out. A test setup, expermi entaland FE calculating results are discussed and stress distribution in the joint aswell as the steel joints of roof construction failure lmi it load are presented. The present investigation indicates that the steel joints of roof construction subjected to design loads and 2 tmi es design loadshave sufficient strength and rigidity. The results from FE calculation are smi ilar to those from the expermi ent, which shows that static behavior of the joint can also be found out through FE analysis. The suggestions for welding quality of the fansteel joints of roof construction is proposed. K ey words: circular steeltube; welding technology; behavior of static force; fullscale test; finite element analysis; tubular joint