矿井通风设施技术标准（Technical standard for mine ventilation facilities）.docVIP

下载本文档

8
0
约1.39万字
约 13页
2017-07-22 发布于河南
举报
版权申诉

矿井通风设施技术标准（Technical standard for mine ventilation facilities）.doc

1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

矿井通风设施技术标准（Technical standard for mine ventilation facilities）

矿井通风设施技术标准（Technical standard for mine ventilation facilities） Technical standard for mine ventilation facilities Permanent ventilation facilities Permanent seal It is constructed with non combustible material, with no leakage (hands touch, no ears, no sound). 5 meters before the closed support is complete, no spalling and roof fall, no debris, no water, no mud. The construction of closed to open help, before cutting, digging at the bottom, the ordinary closed wall groove depth of not less than 200mm; the first break of brickwork roadway arch after cutting, groove depth of not less than 300mm; the fire sealing wall groove depth of not less than 500mm; see hard coal and rock bottom and help, then it is. The thickness of the enclosed wall is not less than 0.8m, and the thickness of the top of the firewall is not less than 1.2m. If there is water in the airtight wall, an anti water tank or an anti water pipe shall be set up, and the goaf of the spontaneous combustion coal seam shall be sealed. Observation holes and grouting holes shall be provided, and the orifice shall be tightly sealed. To set up fences, alarms, signs, check and check the box board closed before (except into the exhaust between the wall). Wall formation (1m length, punch is not greater than 10mm, stone, pointing except) no cracks, joints and heavy hollow wall around, put no less than 0.1M skirt. Permanent damper Each group of permanent air door shall be no less than two, and the opening distance of the air door shall be no less than one train length, and the distance between the door and the air dampers shall be no less than 5m. When there is an air door between the main inlet and the return shaft and the main inlet and return air lanes, two interlocking forward air dampers and two reverse dampers must be installed. The air door closes automatically and the damper does not open at the same time. The door to edge along the mouth, a gasket, contact closely, the door is smooth without air leakage, doors