绿化施工（Afforestation construction）.docVIP

绿化施工（Afforestation construction） Green construction procedures and technical requirements 1) clean up the site, the construction site of all garbage, weeds, debris, such as a comprehensive clean-up. 2) site formation in strict accordance with the design standards and requirements of the landscape, backfilling flat to the design elevation of the site were dug, turf planting soil thickness not less than 30cm, flower planting soil thickness not less than 40cm, tree planting soil thickness not less than 70cm, to meet the requirements of the broken surface finishing of flat or curved surface, the whole entire potential according to the design requirements of slope drawings. The elevation conforms to the request, has the special situation and the owner agrees the processing. 3) according to the proportion of the design plan, the layout of the layout shall reflect the location, layout and reflection of the various trees in the design drawings to the actual site to ensure that the layout of the seedlings conforms to the actual requirements. When the actual situation conflicts with the drawing, it shall be adjusted appropriately with the consent of the supervisor. 4) digging holes and applying fertilizer trees, planting holes are mainly circular, and flowers and shrubs adopt strip rows, and the planting points are larger than the root diameter of trees, and the diameter is about 30cm. Shi fertilizer according to the work instruction. 5) seedling specifications and transport options, seedling specifications and design specifications error shall not exceed 5%, according to design specifications to select seedlings. Rope, mats packing with trees and shrubs soil ball, and proper pruning, to prevent excessive evaporation of water and affect the survival rate. 6) seedling planting shall be carried out according to the instruction of seedling planting operation, and the trees shall be protected by standing piles. Seedlings are planted according to the order of large trees -- middle