F5负载均衡器（F5 load equalizer）.docVIP

F5负载均衡器（F5 load equalizer） F5 load balancer concise configuration manual (2006-03-03, 22:25:47) categories: Network Load balancers are commonly known as four - layer switches or seven - layer switches. The four layer switch mainly analyzes the IP layer and the TCP/UDP layer, and realizes the four layer traffic load balance. In addition to supporting the four layer load balancing, the seven layer switch also analyzes the application layer information, such as HTTP protocol, URI or Cookie information. I. F5 configuration steps: 1, F5 network planning (1) network topology (specific to the distribution and connection of network device physical ports, the distribution and connection of server network card) (2) the allocation of IP addresses (specifically to the allocation of network devices and IP addresses of server NICs) (3) F5, VIP, member pool, node, load balancing algorithm and policy retention method 2, F5 configuration before preparation (1) version checking F5-portal-1:~# B version Kernel: BIG-IP Kernel 4.5PTF-07 Build18 (2) time check - if not correct, please change in single user mode F5-portal-1:~# date Thu May 20 15:05:10 CST 2004 (3) for the License site with the F5 yourself to the F5 website for license General configuration for 3 and F5 (1) in the case of security requirements, in the setup menu, you can open the telnet and FTP functions to facilitate future maintenance (2) configure the VLAN unique_mac option. This option is to make sure that the MAC addresses of different F5 on VLAN are different. By default, the MAC addresses of each of the F5s VLAN are the same. It is recommended to select this option when configured. You can use the command ifconfig - A to test Specifically, system/Advanced, Properties/vlan, unique_mac (3) configure the SNAT any_ip option, which allows you to convert Ping data streams to ensure that the machine within the network has snat. Ping is a third - tier packet, and by default, F5 does not convert Ping packets, that is, intern