技规调车（Technical regulation shunting）.docVIP

技规调车（Technical regulation shunting） The twelfth chapter shunting work general requirements The 217th (202nd) shunting work station, the station should be carried out according to the technological process and the shunting operation plan. Personnel engaged in shunting operations shall do so: 1. marshalling and disassembling trains in time to ensure that the train leaves at any time according to the train diagram, and does not affect the connection of the train; 2. timely delivery of passenger and freight operations and maintenance of vehicles; 3., make full use of shunting locomotives and all technical equipment, adopt advanced working methods, complete the shunting task with the least amount of time; 4., conscientiously implement the operation standards to ensure the safety and safety of the personnel involved in shunting operations. The 218th (203rd) shunting work to fixed operation area, line, shunting locomotive, personnel, shift, shift time and shift the location, number and location of tool. Shunting locomotives and small running locomotives for fixed replacements shall comply with the conditions of shunting locomotives (front and rear headlights, handrails, skid pedals, etc.). 219th (204th) stations with busy shunting and more wiring can be divided into several shunting areas. No good contact and protection, no crossing or transfer operation. The connection and protection measures of shunting locomotive operation shall be stipulated in station fine. The 220th (205th) should be used for wireless shunting adjustable lighting display device, and use the provisions of frequency, the display mode shall comply with the relevant requirements. The display equipment of the radio control light shall be used in conjunction with the train operation monitoring and recording device, and the procedures for the use, maintenance and management of the equipment for displaying the radio lights shall be prescribed by the railway administration. When the radio light control displa