减速器1（Reducer 1）.docVIP

减速器1（Reducer 1） The reducer is an independent closed transmission between the prime mover and the working machine. It is used to reduce the speed and increase the torque to meet the needs of the work. It is also used in some occasions to increase speed, which is called the speeder. Selection should be selected according to the working conditions, machine technical parameters of reducer, power performance, economic and other factors, comparison of different types and varieties of reducer dimensions, transmission efficiency, capacity, quality, price, choose the most suitable reducer. Retarder classification There are many types, varieties and types of speed reducers. At present, there are more than 40 kinds of reducers. Reducer category is according to the use of gear tooth and tooth profile curve division; reducer reducer structure and different varieties is designed according to the need to use; type of reducer reducer with different characteristics on the basic structure on the tooth surface hardness, transmission series, shaft type, assembly type, installation type, connection type factors and design. Load classification of a retarder Compared with the work machine load reducer is complex, has great influence on the speed reducer, speed reducer is the important factor selection and calculation of the state for the work load deceleration machine (from motivation) load status is usually divided into three categories: Uniform load; Medium impact load; Strong impact loading. [edit this paragraph] the correct installation of the reducer The correct installation, use and maintenance of reducer is an important link to ensure the normal operation of machinery and equipment. Therefore, when you install the reducer, please be sure to strictly follow the following installation and use of relevant matters, seriously assembled and used. The first step is to confirm the motor and the reducer are in good condition before installation, the size of all parts and strict inspection