51单片机ds18b20传感器毕业论文.docVIP

中国计量学院 现代科技学院 本科毕业设计（论文） 风扇过热报警控制器设计 Fan overheat alarm controller design 学生姓名 陈斌 学号 1030114124 学生专业 电气工程及其自动化 班级 电气101 系 机电工程系 指导教师 孙冠群 讲师 中国计量学院现代科技学院 2014年5月 郑 重 声 明 本人呈交的毕业设计论文，是在导师的指导下，独立进行研究工作所取得的成果，所有数据、图片资料真实可靠。尽我所知，除文中已经注明引用的内容外，本学位论文的研究成果不包含他人享有著作权的内容。对本论文所涉及的研究工作做出贡献的其他个人和集体，均已在文中以明确的方式标明。本学位论文的知识产权归属于培养单位。 学生签名： 日期： 摘 要 关键字：风扇单片机，智能控制Abstract Industrial fans have applications in many areas such as large industrial plants , logistics centers , conference centers , airports and so on. Due to the relatively high power industrial fans , heat generated when working more, and usually 24 hours of continuous work. As the temperature increases, continue to work at high temperatures will affect the life of the fan , and even affect the lives and property of the user. Industrial fans overtemperature alarm design is to make industrial fans operate at a safe temperature . The design of the analysis on the basis of the above problems, the use of intelligent chip solution to control the temperature of the smart fan problem. System microcontroller core, with digital temperature sensor for the detection of components, with LCD and relay control circuit, the temperature control of industrial fans. SCM and DS18B20 achieved through a single bus communication to read the temperature, the internal temperature is normal when the fan when the relay on the main circuit makes the fan starts to work when the temperature exceeds the warning line system with lights and an audible alarm will directly exceeds the maximum Turn off the main circuit. The whole system fully automated operation, the LCD screen displays real-time temperature, microcontroller automatic alarm and automatically cut off the main circuit. Through simulation design and physical production, and fully verify the feasibility and reliability of the program, to achieve this temperature control and protection systems for industrial fans provide some