小区更新切换小区重选（Cell update handover cell reselection）.docVIP

下载本文档

37
0
约7.64千字
约 10页
2017-07-23 发布于河南
举报
版权申诉

小区更新切换小区重选（Cell update handover cell reselection）.doc

1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

小区更新切换小区重选（Cell update handover cell reselection）

小区更新切换小区重选（Cell update handover cell reselection） 1 cell update The main functions of the cell update process are as follows: (1) notify UTRAN that the UE in the CELL_PCH or CELL_FACH status is re entering the service area; (2) notify the UTRAN UE AM RLC entity that an RLC error is not recoverable; (3) periodic cell updates can be used as UE monitoring mechanisms in the CELL_PCH or CELL_FACH state; (4) notify the UTRAN that the UE in the CELL_PCH or CELL_FACH state occurs after cell reselection Residential area; (5) processing of wireless link failures in UE under CELL_DCH; (6) processing for the failure of UE to send UE CAPABILITY INFORMATION messages; (7) notify the UTRAN that the UE in the CELL_PCH state receives the paging or needs to send up data, You need to transfer the status to the CELL_FACH state; The cell update process is initiated by UE, and the cell update process can be initiated when the UE meets one of the following conditions. If Several cell update trigger conditions occur simultaneously, in accordance with the following order, priority for the previous reasons for cell updates. (1) uplink data transmission If UE is in the URA_PCH or CELL_PCH state, there are other RB1 on RB or RB1 The upstream RLC data block or control block needs to be sent, and the UE starts the cell update process and sets the cause value as Uplink, data, transmission.. (2) paging response If UE is in the URA_PCH or CELL_PCH state, receive the PAGING TYPE 1 for the UE Message, in which the Used PAGING identity is UTRAN identity, and does not contain optional CN Originated page, to, connected, mode, UE, and trigger condition 1 is not satisfied, then UE starts the cell Update the process. Set the reason value to PAGING response. (3) Radio, link, failure If UE is in the CELL_DCH state, the T313 is timed out (the physical layer is out of step) and the conditions 1 and 2 are not satisfied Enough, the UE starts the cell update process after releasing the dedicated physical channel r