打印机偏色汇总（Printer color summary）.docVIP

打印机偏色汇总（Printer color summary） The adjustment method of partial color inkjet printer 2008-06-24 05:33:51| classification: computer hardware | Tags: | font in Small subscription Starting from the hardware, if the ink cartridge or cartridge nozzle cavity well into the air, resulting in a color ink is not being played, may cause partial color; this can continuous cleaning nozzle several times, so the cartridge out of the air, if not, it can be placed about 2 hours after the nozzle generally, no problem. Second, the aging of the print head, the slightest damage will also cause ink jet nozzle uneven, but also cause partial color; for this problem, it is easy to handle, change nozzle. If there are no problems in these two areas, you should start with the type and color setting of your computer. The method is simple, direct method is used to calibrate the color print black and white photographs, as long as the print black and white pictures can be very close to the black and white color, the color adjustment data preservation can be a good color printed photos. Of course, this method is not working well. You can simply try it. Similar to this principle, the more complicated approach is; 1. find a more colorful photos, colors do not adjust, print out directly, compared to the screen found that the overall red, yellow; 2., now adjust the color, image adjustment - color balance - red reduced by 40, yellow increased by 20, and then print one, found that the color is normal, but the picture is still slightly yellow, saturation is not enough; 3. image - adjustment - color balance - yellow increases 20, image adjustment - hue saturation - +10, printed out color is too punctual. 4. open the action palette, a new action named color adjustment, the color adjustment of the above steps again, OK! Next time you print you just need to perform this action, the color correction. Because the display standard of each person is different, the printer and ink are not the same, so some people