扩声系统（Sound reinforcement system）.docVIP

扩声系统（Sound reinforcement system） Yiersansiwuluqibajiu pickup 1, mixer, XENYX, X1622USB-X2222USB 2 、 feedback suppressor DSP1124P FBQ2496 3, effect device FX2000 4 、 exciter SU9920 SX3040 5 、 equalizer FBQ3102 6, frequency divider, CX2310, CX3400 7, pressure limiter, MDX1600, MDX2600, MDX4600 Signal processing: preamplifier, level matching, mixing effect, frequency response correction. Signal distribution: the collected signals are collected and distributed to the playback medium (field sound reinforcement and stage monitoring, recording room: control room, earphone, tape recorder), signal processing in marshalling. Mixing: adjust the volume level / frequency allocation between each signal, and monitor the level of the whole mixing to match the recording equipment / divider / final amplifier. This is the most important function of the mixer, where all other functions are converged. GAIN (gain) knob: adjust the sensitivity of the microphone and linear input COMP (compression) knob: adjust the signal compression effect of selected channel EQ (Jun Heng) knob: adjusts the selected channels high, middle, low, frequency. Adjust the FREQ (frequency) knob to control the specified frequency PAN/BAL (left and right balance) knob: adjust the stereo of the vocal tract AUX (auxiliary input channel) knob: controls the input signal of this channel to AUXSEND size. When the signal needs to be transmitted to the listener, press the PRE button. The FX knob is used to transmit channel signals to the built-in multiple sound effects processor. MUTE (silent) button: adjust the channel in silent state CLIP (distortion signal) LED indicator: signal overload indication CHANNEL FADER (channel fader) to adjust the volume POWER ON (power) switch: turn on the power supply of the mixer or turn off AC IN connects the attached power cord to the general outlet PHANTOM ON (fantasy power) switch: when used with a capacitive microphone, the 48V power can be transmitted to the XLR input The AUX SENDS (A