proe 转cad参数（Proe to CAD parameters）.docVIP

proe 转cad参数（Proe to CAD parameters） 1metric and English turn down on OK Proe engineering drawings in the file (right), properties, drawing options, set parameters Dual_secondary_units inside inch becomes mm, OK The contents of the catalogue are as follows: Engineering drawings, configuration files, common options and instructions Two, engineering drawings, configuration files, use detailed 1. Create engineering drawing configuration file *.dtl 2, the project diagram configuration file options 3 、 configuration options and modification of engineering drawing configuration file 4 、 correct call of engineering drawing configuration file Engineering drawings, configuration files, common options and instructions Drawing_units mm (previous options, spaces as values, same below) The unit that sets all the drawing parameters, such as the size of the text behind, and the size of the arrow, is set in mm. First, set this option. Drawing_text_height 3.5 Sets the default height of the default text, such as the text in the annotation, and the size of the value in the annotation. Text_width_factor 0.7 Set the text height and width ratio, according to the national standard should use long imitation Song typeface, should be 0.7. However, this setting is invalid for the windows systems own song copy. Broken_view_offset 3 Sets the distance between two broken lines of a broken view Detail_circle_line_style phantomfont Set the boundary line of a detailed view (partial enlargement) to affect the print thickness Projection_type first_angle Set the view of the projection for the first angle method (GB requirements, with the first corner method, Japan and other countries using the triangle method) View_scale_denominator 3600 View_scale_format ratio_colon The above two items are set together with each other. Set the proportion of the display in decimal, odds, or fractions. Detail_view_scale_factor 2 Sets the magnification of the view (partial enlargement) relative to the parent view. After