proe 转 cad（proe 转 cad）.docVIP

proe 转 cad（proe 转 cad） General PROE transfer to CAD has a lot of problems! Here to introduce solutions! 1, set the CONFIG file: drawing_units = mm, default_draw_scale, =1:1 to solve the scaling problem 2, to make engineering drawings output DWG or DXF files do not appear garbled, set dxf_out_stroke_text is yes Solve Chinese name without showing problems 1, the font in PROE is changed to imitation song (if there is no copy of winC:\WINDOWS\Fonts in the font, to the proe installation font directory) 2, using the T Fang Song-GB2312 font in the PROE project diagram, the CAD is transferred to the R12 version of the *.dxf format file. The CAD is open, the text style is T GB2312 font can be opened 3, there is a way: in the PROE directly to save the R12 version of the *.DXF file, in the CAD open, the text style selection, use large fonts, ----gbcbig.shx is OK Although proe can complete the engineering drawing but sometimes print problem is installed finprint can print 1:1, CAD online garbled, saying that I also have to optimize the font but do not know why or not, so now I have a way to get the C:\WINDOWS\ Fonts inside the Romans font test to the proe installation directory under the text folder and then put / set / drawing inside the default_font set to Romans, CAD after the inside of the word Romans word is not garbled, but also with other Chinese set according to their own interests or the company standard. Concrete method: 1., pro/e engineering drawings file output into AutoCAD *.dwg, *.dxf format ---- can, the method is in the pro/e engineering drawings, FileSaveaCopy select the corresponding DXF or DWG format 2. output the autoCAD file in the pro/es sketch - - no! 3. input the AutoCAD format file into the pro/e engineering drawing file. Yes, the method is to select the corresponding *.dxf or *.dwg file in the pro/e engineering diagram InsertDatafromFile ; 4. in the pro/e2000i2 (2001040) version, the pro/es engineering drawing files are exported to AutoCADs *.dwg and