proe小资料（Proe small data）.docVIP

proe小资料（Proe small data） The metric system will be converted to the metric system in the engineering drawing: (you must have the cns_china.dtl file first) Open an English drawing file, file, property, drawing options, open the file, select cns_china.dtl, ok. This method is valid only for the current view. When you want to change all views to be metric, set as follows: Tools -- options -- find, enter draw, find draw_setup_file browse, open cns_china.dtl, add / change ok Rotate profile: start command select the view that you want to create a section select the position where you want to rotate the view select the baseline plane --OK Capture line creation: start command - select the edge (dashed line) of the view - enter offset - enter the offset number --OK Drawing template formulation: new format -- insert -- from file -- select template made of CAD (DWG format) - determine --OK Use custom templates: New - draw - format is empty - browse - select the template --OK created before Move the view to different pages: select the view to be moved - Edit - move the item to the enter to move to OK Pro/e two-dimensional drawing (draw horizontal straight line): go into the engineering drawing create - Sketch - - the grass cutter priority - press the horizontal / vertical - draw a line - Edit - trim - length - enter the value - select the line --OK (the rest of the analogy) Two dimensional drawing offset: Edit - transform - translation and replication - select elements - determine the offset direction - enter offset value - offset number --OK Tolerance display: File - Property - tolerance standard - option bar, enter tol_display, and change the value to yes--OK Change in tolerance: select the dimension to be changed - Property - tolerance model: symbol (meaning nominal, i.e. no tolerance). Other analogies Size move: select the size to move - right - move the item - select the view that you want to put in the size When the diameter of the mark when making notes, and then choosin