t0102（t0102）.docVIP

t0102（t0102） Commencement Chronicle Hongqi refinery is a state-owned medium-sized enterprise with annual processing capacity of 2 million 500 thousand tons, and the catalytic workshop with 800 thousand tons of annual processing capacity is the most important production workshop in this plant. The production and operation of the device directly affect the economic benefits of the whole plant. FCC began nearly a month of comprehensive overhaul from the beginning of September, in addition to the routine maintenance of the maintenance of equipment, instrumentation and control system to conduct a comprehensive renovation, the introduction of the United States Honey Well DCS (distributed control system) control technology, the removal of all the operating room the original instrument, instead the five is a computer with a large screen display, the operation of the workers will be all through the keyboard and the screen to complete the transformation, data recording and collection of these tedious work will be done automatically by computer. The transformation of investment of nearly 30 million, after the transformation of the level of automation equipment will be greatly improved; at the same time to achieve the optimization of more advanced control to the factory has started and Honey Well of the further development of the optimal control problem. The start-up process of the catalytic unit is mainly divided into three steps: 1.. Preparatory work before the start of the operation; 2. warming up and setting up the catalyst cycle; 3. entering the raw oil, adjusting the operation to normal processing, and measuring the qualified products. This started from September 26th to September 30th the first two steps went smoothly, with confidence to start participating comrades to drive the success of National Day gift in October 1st, however, in the third step, we encountered a hitherto unknown difficulties. October 3rd At 23:00, the director of the catalytic workshop commands the