停车场常见问题以及故障解决（Common problems and troubleshooting in parking lot）.doc

停车场常见问题以及故障解决（Common problems and troubleshooting in parking lot） Parking system failure analysis and treatment of parking lot system Today, we will introduce some parking system problems encountered in the analysis and treatment methods: 1, communication barrier Reason: 485 communication line break, short circuit or wrong connection; (more common) Processing method: check the communication line, check the wiring, confirm the communication line no open circuit, short circuit or wrong connection. Reason: control board number is not set correctly; (more common) Process: check whether the machine number is set correctly, check the other control panel in the system, check whether there is repeated machine number, according to the instructions in the setting method to reset the machine number. Reasons: management software communication port settings error; (more common) Processing method: communications port inspection management software system [settings] in, and whether the connecting port, if the control panel is connected to port USB or PCI extension, please check the port number in the operating system device manager, please pay special attention to: USB 232 port expansion stability is poor, often inserted will cause the port number change, when conditions permit, try to use PCI serial expansion cards. Reason: communication port conflicts with other software (less rare) How to handle this: check if other software has enabled the communication port and shut down other software. RS485 communication card damage or computer serial damage; (less rare) Processing method: replace RS-485 communication converter, computer install PCI serial port expansion card or replace computer. Reason: the communication circuit of the control board is out of order; (rare) Process: repair or replace control panel The reason: the management software version does not match with the control panel; (rare) How to do this: reinstall and control the board matching software. 2, communication is no