写真机喷头维护（Sprinkler maintenance）.docVIP

写真机喷头维护（Sprinkler maintenance） After the equipment is installed and the initial stage of the equipment is started, the maintenance of the nozzle is maintained 1., in order to make the nozzle into the best operating state, in the equipment before the official start of the production business, please make sure to print as much as possible a few pictures, the screen is best CMYK4 color is used, but also in The 2 side of the screen are added to C, M, Y, K4 color color to ensure that the 4 is always in a state of ink jet nozzle. 2., when printing, it is best to the most right cleaning station in the moisture sponge together with its bracket to take out. The two day after the completion of the work. How to sprinkler maintenance every day all the print job is completed, in order to maintain the best working state and the nozzle to avoid the volatile solvent ink and plug the nozzle, then please according to the following method for maintenance for equipment for nozzle: 1. turn off the device power. 2. wash the moisturizing sponge with a special cleaning solution first, then pour the cleaning liquid onto the sponge to soak it. 3. move the nose back to the right end of the cleaning station and close the nozzle to the moisturizing sponge. 4. keep this condition overnight. Three. Find the nozzle slightly blocked after the treatment method 1., in the process of jet printing found that the nozzle slightly blocked phenomenon, do not hesitate to press the PAUSE button to stop printing operations, and then use a vacuum cleaner or manual pump to make ink from the nozzle Two. Nozzle cleaning, after cleaning, use a plastic extrusion bottle to spray some cleaning liquid on the nozzle surface, wash away the residual ink. Note: use the manual air pump, do not force too much, otherwise it will damage the nozzle because of too much pressure. 2. timely, decisive and thorough handling of nozzle slight obstruction is very important for keeping the nozzle in the best position during the long pr