ansi c12.20-2010 american national standard - …（ansi c12.20 - 2010美国国家标准-u2026）.pdf

ANSI C12.20-2010 American National Standard for Electricity Meters— 0.2 and 0.5 Accuracy Classes ANSI C12.20-2010 Revision of ANSI C12.20-2002 American National Standard for Electricity Meters— 0.2 and 0.5 Accuracy Classes NOTICE OF ADOPTION ANSI C12.20 was adopted and is approved for use by the Department of Defense (DoD). The National Electrical Manufacturers Association has furnished the clearance required by existing regulations. Copies of the document are stocked at the Standardization Documents Order Desk, Building 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, for issue to DoD activities only. All other requestors must obtain copies from NEMA. Secretariat: National Electrical Manufacturers Association Approved August 31, 2010 American National Standards Institute, Inc. ANSI C12.20-2010 NOTICE AND DISCLAIMER The information in this publication was considered technically sound by the consensus of persons engaged in the development and approval of the document at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participating in the development of this document. NEMA standards and guideline publications, of which the document contained herein is one, are developed through a voluntary consensus standards development process. This process brings together volunteers and/or seeks out the views of