日本原装进口高温一氧化碳气体传感器NAP-78A最高可耐200度.pdfVIP

USERS MANUAL FOR NAP-78A CATALYTIC TYPE INCOMPLETE COMBUSTION SENSOR NEMOTOs NAP-78A is a newly developed catalytic type gas sensor designed to detect incomplete combustion of domesticwater heaters to be installed indoors. Constant monitoring of the combustion conditions of a water heater is possible by installing an exclusively designed detecting unit with NAP-78A in a flue duct. When incomplete combustion occurs, the unit will put out signals proportional to incomplete combustion levels (CO gas concentration levels in a flue gas). 1. Applications * FF type water heaters (Forced draught balanced Flue type) * FE type water heaters (Forced Exhaust type) * Water heaters for air conditioning * Gas/Oil heaters 2. Features * Temperature compensation is unnecessary in the wide range from room temperature to 200oC. * Depending on the kinds of fuel gases and their combustion conditions, the ratio of H2 gas and CO gas generated upon incomplete combustion varies in the range of 1:1 to 4:1 (CO:H ). However NAP-78A is applicable to almost 2 of all fuel gases because of its relatively low hydrogen gas dependency characteristic. * Excellent reproducibility and stability. * Superior accuracy such as 300 ppm of CO gas in a flue gas can be detected. * Small humidity dependency in a flue gas. * Small-sized, lightweight, and less-expensive. * Distinguished long term stability and durability. * Easy calibration because of small individual differences in production lots. * More than 10-year life was confirmed by accelerated tests using actual water heating equipment. * Excellent corrosion resistivity.