电解液是做什么用的（What is electrolyte used for）.docVIP

电解液是做什么用的（What is electrolyte used for） The electrolyte is the most conventional electrolyte, and the electrolyte is obtained by heating the GAMMA lactone, organic solvent, and weak acid salt capacitor. The cathode of an aluminum electrolytic capacitor in general is the electrolyte. Electrolyte introduction Electrolyte is a medium used in chemical batteries and electrolytic capacitors (with certain corrosiveness) to provide ions for their normal operation. And ensure that the chemical reactions occurring in the work are reversible. Electrolyte action The use of electrolyte as a cathode has many advantages. The first is that the contact area between the liquid and the medium is large, which helps to increase the capacitance. Followed by the use of electrolyte electrolytic capacitor, the highest ability of 260 degrees of high temperature, so that you can wave soldering (wave soldering is an important process to install SMT patch), while the pressure is also relatively strong. In addition, the electrolytic capacitor using electrolyte as the cathode, when the dielectric is broken, the capacitor can self heal as long as the breakdown current does not last. But the electrolyte has its drawbacks. The first is easy to volatilize, leakage in high temperature environment, a great impact on the life and stability under high temperature and high pressure electrolyte and may cause an explosion instantly vaporized, increasing the volume (that we often say that the explosion pulp); followed by the method of ion conductive electrolyte, the conductive rate is very low, only 0.01S (conductivity. The reciprocal of Ohm) /CM, which causes the capacitance value of ESR (equivalent series resistance) is particularly high. Electrolyte usage Use solution, lead cathode (negative electrode), workpiece as anode (positive), 60-65, current density 10-25 amp / DM2, voltage 8 to 10 volts, time 5-8 minutes. Electrolyte precautions 1. slurry bubble at the initial stage of electrolytic polishing will