测量队工作简介（Survey team work brief）.doc

测量队工作简介（Survey team work brief） Survey team work brief A measurement is a technique for measuring the relative positions of points on a ground point so as to display natural and artificial objects in proportion according to the correct horizontal or vertical relation between them. Measurement is the eye of engineering construction, relating to every link and process of engineering construction, and plays an important role in engineering construction. At the beginning of the project, the surveyor shall contact the site supervision engineer first, carry out the on-site handover of the known construction control network, and obtain the records of the known construction control network and the points. Because of the interference or damage of the earlier construction and the change of the surrounding environment, the control point is likely to drift or subside, so it is necessary to know the repetition of the control network. Then, according to the accuracy of the known construction control network and the accuracy of the equipment equipped with the project, the retest scheme of the construction control network is determined. Generally, the same method is used to retest the known control network. The retest is divided into plane control survey and elevation control survey. Horizontal control survey adopts GPS survey or total station method to measure back. Height control survey adopts leveling method or photoelectric distance trigonometric leveling instead of leveling method. Retest should be carried out in strict accordance with the norms, engineering measurement, water conservancy and Hydropower Engineering Specification for hydropower and water conservancy project measurement norms, norms, GPS measurement or other measurement standards, the occurrence of non-standard gauge or record must be re measured or buce. After the completion of the retest, the external industry will undergo 200% independent inspections, and the accuracy of the error can be adjusted without exce