原型裁剪法（Prototype cutting method）.docVIP

原型裁剪法（Prototype cutting method） In the world, cutting the most advanced countries are using the prototype method, but because of, not in the use of direct prototype cutting, and bust ease and armhole depth is divided into two steps, and our traditional habits do not match, therefore, the prototype method can not completely copy, and the proportion cutting method used for years in my in China, there are not abandon the essence, for some traditional styles, such as Western skirts, trousers, shirts, suits, formula, simple and correct, and can be directly cut in the cloth, convenient and quick. Because of the traditional proportion cutting method, we can use the prototype method to combine the advantages of both of them, and open up a new way of cutting. Lets take the womens basic clothing as an example. I. measuring site: Measurement site prototype cutting method is: Japanese cultural common only measuring chest, back length, length three dimensions, and the collar The shoulder is not accurate enough to determine the measurement sites are American denlal, too, is not conducive to the use of complex program. Proportional cut There is no back length in the measuring part, and the determination of the waist line is not scientific enough. By comparison: collar, shoulder, chest, back, long sleeve measurement of the five parts is more appropriate. Two, size plus: The prototype method is divided into two steps, the first step is to consider the basic body volume, add 10cm, and then second steps Continue adding according to style. The proportion cutting method is more convenient for the regular chest size and direct cutting. By comparison, we conclude that... Chest size, and then finished product size, and then mapping. Specific can be referred to as follows: no sling jacket, bust add as 0. Tight shirt for 4.8cm; ordinary shirt for 8-10cm; loose shirt 12-20cm; suit 8-10cm; coat for 15- 20cm. Mapping method: 1, clothes piece: (1) the bust is the finished size. (2) neckline: The