家装中不容忽视的N个验收问题a（N acceptance problem that can not be ignored in home improvement a）.docVIP

家装中不容忽视的N个验收问题a（N acceptance problem that can not be ignored in home improvement a） N acceptance problems that can not be ignored in home improvement 1, hot water pipe should be color separation construction; if the amount of renovation is not large, hot water pipe can replace the cold water pipe, but the cold water pipe can not replace the hot water pipe to take care of the pipe. 2, the water pipe should be set pipe clamp must be firmly installed. 3, waterways after the completion of the transformation must do pressure test, (general waterway 8 pressure), after voltage regulation, within half an hour the pressure drop is not more than 0.05MPa qualified. Otherwise, the next process is not allowed or the pipe is covered. 4, install the toilet, wash basin, do not allow the use of cement. 5. The distance between the water pipe and the electric pipe should be kept at least 200mm. 6, prohibit the use of direct drill slotting, cutting machine should use auxiliary slotting drills; lightweight wall lateral slot does not exceed 500mm; bearing wall in principle does not allow transverse slotted (and sometimes according to their own requirements with the exception); inner insulation wall transverse sloting not more than 1000mm; the top slot must be agreed by the management departments and the owners, depth of not more than 20mm, with a hose sleeve sheathed wire. 7, PVC flame retardant pipe material: PVC flame retardant pipe wall thickness of not less than 1.3mm, it should be 1.6mm 8, to ensure the quality of the cassette. 9, the wire through the pipe laying, the pipe shall not have joints, kinks. 10, prohibit strong electricity and telephone, network, sound, television and other communication lines installed in the same pipeline. 11, wires, bushings, pipe bending elbow as much as possible, is conducive to future changes in line 12, casing cassette with lock. 13, soft tube in principle can only be used in the top surface slotted line, and if the load-bearing wall slotted line c